flag
ornament-full-title

Brother mfc 8220 paper jam troubleshooting

ornament-full-title
you removed the jammed paper, please open and close the scanner cover. If the jammed paper inside the machine can be removed,. Pull the two green levers inside the machine to release the jammed paper. Open the Jam Clear Cover (1) at the back of the machine. Make sure that jammed paper is not left in the corners of the machine. Follow the steps below to remove any ripped paper remaining inside your Brother machine. Make sure the cover is closed correctly. If the print head is in the right corner as shown in the illustration below, hold down (Cancel) or, stop/Exit until the print head moves to the center. Step 1: How does the information on this page help you? If a paper jam occurs when using the optional lower tray unit, check for correct installation of the upper paper tray. Lift the scanner cover (1) to release the lock. When you open the front cover or back output tray of the MFC, never touch the shaded parts shown in the following diagram. DO NOT touch the encode strip (1). Doing this may cause damage to the machine. Make sure that all the jammed paper has been removed from the opening at the front of the machine as shown in the illustration below. If the error message continues to appear, contact Brother Customer Service from "Contact." Related FAQs Related Models DCP-J100, DCP-J105, DCP-J152W, DCP-T300, DCP-T500W, DCP-T700W, MFC-J200, MFC-J245, MFC-T800W If you need further assistance, please contact Brother customer service: Content Feedback To help us jam improve our support. This helps prevent multiple sheets of paper from feeding through the MFC at one time and reduces paper jams. While holding the paper tray in place, pull out the paper support (1) until it clicks, and then unfold the paper support flap (2). If ink gets on your skin or clothing, immediately wash it off with soap or detergent.

Very helpful Helpful Not helpful Step. Please note this form is used for feedback only. Pull the paper tray 1 completely out paper of the machine. Are there any comments you would like troubleshooting to add.



Remove the brother mfc 8220 paper jam troubleshooting paper you inserted from the opening at the back of the machine. You can use a pair of tweezers. Dcpt300, click here to see how brother mfc 8220 paper jam troubleshooting to remove the paper jammed inside the machine. Clear the jammed paper as follows.